TVLogic LVM-180A 18.5 Inch FHD LCD Monitor - TVL-LVM-180A

£2,205.00 £1,837.50

SKU

TVL-LVM-180A

18.5" (500nit) Entry-Level Full-Featured 1920x1080 Wide Viewing LCD Monitor 2X 3G/HD/SD-SDI inputs with one loop out, DVI-I and HDMI inputs, Composite In/Out, Waveform/Vector Scope, Closed Caption : 608/708 (SDI), Focus Assist, Range Error/Y Level Check,

The LVM-180A is an 18.5” model with an 18.5 inch IPS LCD panel with 1920x1080 native resolution, 500 nits, enhanced contrast ratio and wide viewing angle all unmatched by other LCD monitors. A completely redesigned video processing unit provides powerful performance and artefact-free image reproduction. Support for various cinema camera log-to-linear LUTs, easy field upgradability and a full array of image processing features are standard.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

TVLogic LVM-180A 18.5 Inch FHD LCD Monitor - TVL-LVM-180A

The LVM-180A is an 18.5” model with an 18.5 inch IPS LCD panel with 1920x1080 native resolution, 500 nits, enhanced contrast ratio and wide viewing angle all unmatched by other LCD monitors. A completely redesigned video processing unit provides powerful performance and artefact-free image reproduction. Support for various cinema camera log-to-linear LUTs, easy field upgradability and a full array of image processing features are standard.

LVM-180A

Specifications

Display Spec.

Size	18.5"
Resolution	1920 x 1080 (16 : 9)
Pixel Pitch
Color Depth	16.7M
Viewing Angle	178°(H) / 178°(V)
Luminance	500cd/m2
Contrast Ratio	1,000:1
Display Area	408(H) x 203(V) mm

Input

1 X BNC	Analog Input (Composite)
2 X BNC	3G-SDI A/B Channel Input
1 X HDMI	HDMI Input
1 X DVI	DVI Input

Output

1 X BNC	Analog Output (Composite)
1 X BNC	3G-SDI Output

Input Signal

3G SDI	2.970Gbps
HD SDI	1.485Gbps
SD SDI	270Mb/s
HDMI	480i/480p/576i/576p/720p/1080i/1080p/640x480/ 720x400/800x600/1024x768/1280x1024/1366x768
DVI Analog	640x480/720x400/800x600/1024x768/1366x768
DVI DP	640x480/720x400/800x600/1024x768/1366x768
DVI DH	X

SDI Input Signal Formats

SMPTE 425M-A/B

"1080p (60/59.94/50/30/29.97/25/24/23.98/30sF/ 29.97sF/25sF/24sF/23.98sF)

Audio

Audio Out

Analog Stereo (Phone Jack), Internal Speaker(Stereo)

FPGA Functions

1:1 Pixel Mapping Modes for SD/HD, 3G-SDI Level A/B, Audio Level Meter Display, Blue Only, Focus Assist, H/V Delay, Key Lock, Marker, Mono, Range Error, Time Code Display, UMD, User Aspect, Various Scan Modes, Waveform/Vector, X3 Zoom(PBP)

Closed Caption

CC-608 ANC, CC-608 LINE 21, CC-708, OP42, OP47

Calibration

TVLogic Color Calibration Utility, 3D LUT & Adjustable Gamma, 3rd Party 3D LUT Import

Other Functions

REMOTE	GPI (RJ45)
USB	Firmware update by USB memory stick
Ethernet	Ethernet Control support

Options

Battery Bracket, Carrying Case, External Acrylic Filter, Gold Mount, Sun Hood, V-Mount

Key Features

3G-SDI Level A/B

Supports 3G-SDI Level A/B input.

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Blue Only / Mono

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Focus Assist

Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

Key Lock

Key Lock is a password-protection function of the OSD menu so that non-authorized users cannot change the setting of the monitor.

Luma(Y') Zone Check

Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

Range Error

Analyzes the input signal’s Luma (Y’) and chroma (C’) information. If the input signal exceeds the designated minimum and maximum values, the pixel will blink. This function allows for the user to easily identify any issues with exposure.

Time Code Display

Displays the Timecode information on the screen.

UMD

Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.

User Aspect

Adjusts the Width /Height display ratio.

Various Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

Zoom

Magnifies the input signal from 0% to 90%.

What's in The Box

WHAT'S IN THE BOX

1x LVM-180A Monitor

1x AC Power Cable

1x Stand

Related products

Check items to add to the cart or