Marshall Electronics CV574 4K(UHD) NDI|HX3 & HDMI Mini Compact Camera (M12 Mount)

£869.88 £724.90
In stock
SKU
CV574

The Marshall CV574 miniature network streaming POV camera is built around a Sony UHD sensor with over 8.46 million pixels. The miniature CV574 delivers exceptional 4K (Ultra-HD) video performance via HDMI and ethernet IP interface supporting the ultra-efficient NDI HX3, SRT, HEVC codecs from a durable aluminum alloy build with rear I/O protection wings.

Marshall Electronics CV574 4K Mini Broadcast Camera with 4mm Interchangeable Lens HDMI IP Ethernet & NDI|HX3 Outputs

CV574
3840x2160p @ 25, 29.97, 30, 50, 59.94 & 60 / 1920x1080p @ 25, 29.97, 30, 50, 59.94 & 60 / 1920x1080i @ 50, 59.94 & 60 / 1280x720p @ 50, 59.94 & 60

FEATURES
1/2.8″ 8.5MP Sony sensor
M12 interchangeable lens mount
4.0mm M12 lens included
HDMI & Ethernet video connectors
IP (H.265), NDI|HX2 and NDI|HX3 output
3840×2160 up-to 60P
I/O breakout cable with control joystick
PoE support for a 1-cable solution

CV574 networkable POV camera is a new addition to Marshall’s miniature camera lineup. Featuring NDI|HX3, the new Sony 1/2.8″ sensor and 4K UHD output, the CV574 delivers exceptional performance in any workflow.

With the NDI|HX3 codec, the CV574 can deliver low latency, high-quality video with no visible compression artefacts—simultaneous output with HDMI and other IP output options including SRT, RTSP, MPEG-TS and HEVC.

The included breakout cable enables audio input, power and control via RS-485 and the included control joystick. Alternatively, the CV574 supports PoE allowing for power, control and video over just 1 ethernet cable.

A wide selection of M12 lenses complements the included 4.0mm M12 lens, allowing users to select the perfect lens for any scenario.

CV574 is a durable and professional Mini camera with a variety of use cases including sports broadcasts, reality television & live stream events.

New Marshall Mini & Compact 4K(UHD) NDI|HX3 & HDMI Cameras
4K & NDI|HX3 have just got smaller with the introduction of Marshall's NEW CV574 & CV374 networkable Mini & Compact cameras. Both feature exceptional 4K(UHD) video performance via HDMI and ethernet IP interface supporting the ultra-efficient NDI|HX3, SRT, HEVC codecs.

Latest Sensor Technology
Built around a new 8.5megapixel Sony 1/2.8" sensor the CV574 & CV374 offer crystal clear and rich colour accurate video with improved low light sensitivity performance, with the flexibility to fit into a variety of workflows. All supported by an array of interchangeable lenses.

SPECIFICATIONS
Sensor
Sensor Type 1/2.8″ 8.5 Megapixel
Pixel Size 2.75μm x 2.75μm
Resolution & Frame Rates
UHD 3840x2160p 25, 29.97, 30, 50, 59.94 & 60
HD 1920x1080p 25, 29.97, 30, 50, 59.94 & 60
HD 1920x1080i 50, 59.94 & 60
HD 1280x720p 23.98, 24, 25, 29.97, 30, 50, 59.94 & 60
Input & Output Connectors
Video Output HDMI & RJ45 (IP Ethernet, NDI|HX2 & NDI|HX3)
I/O Breakout Cable 1x RS-485 Interface, 1x Locking Barrel 12V DC Power Input, 1x 3.5mm Audio Input
Firmware & Service 1x USB-C
Lens
Mount Type M12
Focal Length 4.0mm
Max. Aperture f/2.0
Focus Manual
Image Control Settings
White Balance Auto / Auto Ext / Preset / Manual (Red-Gain, Blue Gain)
Control Protocol
Control Protocol RS-485
General
Power Input 12V DC

Camera Control Application

  1. Download Camera Control Software HERE
  2. Use USB to RS485/RS422 Converter (CV-USB-RS485)
  3. Use cat5 or 24AWG twisted-pair wire (sold separately)
  4. Connect cable from RS485(+) terminal on Camera to T/R (+) on USB/RS485 converter
  5. Connect cable from RS485(-) terminal on Camera to T/R (-) on USB/RS485 converter
  6. Plug USB cable from USB/RS485 converter into USB port on Laptop or Computer (note ComPort#)
  7. Open up CamControl Program and match Serial Port to corresponding ComPort# used
  8. Select Baudrate in CamControl Program and match it in Camera OSD Menu under DISPLAY CONTROL > BAUDRATE
  9. Select Camera Address in CamControl Program and match it in Camera OSD Menu under DISPLAY CONTROL > CAM ID
  10. Select Open in CamControl Program
  11. Test connection by pushing MENU in lower right of CamControl Program - OSD Menu should come up on video signal
  12. Commands can also be sent without using OSD Menu

Camera Control Software display

WHAT'S IN THE BOX
1x Marshall CV574 Camera Body
1x Camera Breakout Cable
1x 4.0mm M12 Lens
1x Power Supply Unit (PSU)

Marshall’s Focus on AV over IP Camera Offerings..

Related products

Check items to add to the cart or