Marshall CV570 HD Mini Broadcast Camera with 4mm Interchangeable Lens HDMI IP Ethernet & NDI|HX3 Outputs
The Marshall CV570 miniature networkable POV camera is built around a next-generation Sony sensor with over 2.13 million pixels, a larger pixel size and a square pixel array. Miniature CV570 delivers exceptional 10-bit 4:2:2 video performance from a durable aluminium alloy body through NDI HX3 workflows, HDMI and standard IP with SRT.
Marshall Electronics CV570 HD Mini Broadcast Camera with 4mm Interchangeable Lens HDMI IP Ethernet & NDI|HX3 Outputs
CV570
1920x1080p @ 23.98, 24, 25, 29.97, 30, 50, 59.94 & 60 / 1920x1080i @ 50, 59.94 & 60 / 1280x720p @ 50, 59.94 & 60
FEATURES
1/2.8″ Sony sensor with larger pixel size and square pixel array
M12 interchangeable lens mount
4.0mm M12 lens included
HDMI & Ethernet video connectors
IP (H.265), NDI|HX2 and NDI|HX3 output
1920×1080 up-to 60P
I/O breakout cable with control joystick
PoE support for a 1-cable solution
CV570 networkable POV camera is a new addition to Marshall’s miniature camera lineup. Featuring NDI|HX3, the new Sony 1/2.8″ sensor and total HD output, the CV570 is performant and flexible, fitting into various workflows.
With the NDI|HX3 codec, the CV570 can deliver low-latency, high-quality video with no visible compression artefacts—simultaneous output with HDMI and other IP output options including SRT, RTSP, MPEG-TS and HEVC.
The included breakout cable enables audio input, power and control via RS-485 and the included control joystick. Alternatively, the CV570 supports PoE allowing for power, control and video over just 1 ethernet cable.
A wide selection of M12 lenses complements the included 4.0mm M12 lens, allowing users to select the perfect lens for any scenario.
CV570 is a durable and professional Mini camera with a variety of use cases including sports broadcasts, reality television & live stream events.
Camera Control Application
- Download Camera Control Software HERE
- Use USB to RS485/RS422 Converter (CV-USB-RS485)
- Use cat5 or 24AWG twisted-pair wire (sold separately)
- Connect cable from RS485(+) terminal on Camera to T/R (+) on USB/RS485 converter
- Connect cable from RS485(-) terminal on Camera to T/R (-) on USB/RS485 converter
- Plug USB cable from USB/RS485 converter into USB port on Laptop or Computer (note ComPort#)
- Open up CamControl Program and match Serial Port to corresponding ComPort# used
- Select Baudrate in CamControl Program and match it in Camera OSD Menu under DISPLAY CONTROL > BAUDRATE
- Select Camera Address in CamControl Program and match it in Camera OSD Menu under DISPLAY CONTROL > CAM ID
- Select Open in CamControl Program
- Test connection by pushing MENU in lower right of CamControl Program - OSD Menu should come up on video signal
- Commands can also be sent without using OSD Menu
WHAT'S IN THE BOX
1x Marshall CV570 Camera Body
1x Camera Breakout Cable
1x 4.0mm M12 Lens
1x Power Supply Unit (PSU)
