Kramer Electronics KDS-100EN/KDS-100EN-U Open-standard H.264/H.265 AVoIP 4K@60Hz streaming encoder with AES67 audio

Call for Price
Call for Lead Time on this Product
SKU
KDS-100EN/KDS-100EN-U

Kramer Electronics KDS-100EN/KDS-100EN-U Open-standard H.264/H.265 AVoIP 4K@60Hz streaming encoder with AES67 audio

KDS−100DEC−U/KDS−100DEC decoder is an advanced receiver for streamed 4K@60Hz video signals via Ethernet over copper or fibre cables. It also decodes the
RS−232 or CEC signals are transmitted over IP network from the encoder. The KDS−100DEC−U decoder USB devices are remotely connected to a host USB on the KDS−100EN−U encoder.

Robust Solution for Large–Scale Installations — Provides an optimized solution for extensive Education and Enterprise campuses, as well as Defense and Homeland Security Facilities, with support for numerous simultaneous video flows and built–in advanced management capabilities.
Highly Scalable — The KDS–100 line supports up to 1000 video sources, suited for large–scale installations.
Built–in Resilient Security Features — Preserves the integrity, availability and confidentiality of the IT network via a highly secured and resilient AVoIP solution.
KDS–100 devices comply with IT security requirements, including 802.1x and HTTPS/TLS.
Simple Planning and Rollout — Leveraging the H.264/265 standard, KDS–100 is highly bandwidth–efficient, thus enabling cost–efficient hybrid use of the existing 1GE IT network. There is no need to deal with complex IP packets prioritization or switching settings. Offering easy management, high reliability, and adjustable bandwidth control, KDS–100 is extremely cost–effective to maintain over the long term.
Alternative Sources/Destinations — An HDMI loop–through the port on the encoder side and an HDMI input port on the decoder, as well as embedding and de–embedding analog and digital AES67 to the IP stream.

SPECIFICATIONS

INPUTS

1 HDMI: On a female HDMI connector


OUTPUTS

1 HDMI: On a female HDMI connector
1 Balanced Audio: On a 5–pin terminal block connector

PORTS

1 Ethernet: On an RJ–45 Connection
1 Fiber on an LC Connector: Standard: 1000BASE–SX, 1000BASE–LX
1 RS-232: On a 3–pin terminal block connector for control
1 RS-232: On a 3–pin terminal block connector for data
2 USB (KDS-100DEC-U Only): On Type–A connectors

NETWORK

1GE
IPv4
RTP/RTCP over UDP
Multicast IGMPv2

VIDEO

Max In/Out Resolution: 4K@60Hz 4:4:4
HDCP: 1.4 and 2.2

VIDEO STREAMING

Compression: H.264 / H.265
Streaming Resolution: 4K@60Hz 4:2:2
Scaler: Yes
Bit Rate Range: 15–60Mbps
Latency: Normal and low
1024X768P/60, 1280X768P/60, 1280X720P/60, 1280X720P/50, 1280X720P/24, 1280X720P/25, 1280X720P/30, 1280X1024P/60, 1600X1200P/60, 1920X1080P/60, 1920X1080P/50, 1920X1080P/24, 1920X1080P/25, 1920X1080P/30, 1920X1200P/60, 3840X2160P/24, 3840X2160P/25, 3840X2160P/30, 3840X2160P/50, 3840X2160P/60
1 AES67 stereo in / 1 AES67 stereo out
HTTPS, 802.1x

RESOLUTION

Indicators: Link and power LEDs, digital display for channel ID

DIGITAL AUDIO

Front Panel: Channel–ID selection button for video streaming

SECURITY

Rear Panel: Restart and factory reset buttons

USER INTERFACE

Controls via Serial USB: API commands (KDS–100DEC–U Only)
Controls via Ethernet: API, embedded web pages and RTSP
PoE+: IEEE 802.3at on LAN (PoE) port
Source (Optional): 12V DC/5A

POWER

Consumption: 36W
Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing
Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing

ENVIRONMENTAL CONDITIONS

Humidity: 10% to 90%, non–condensing
Product Dimensions: 21.46cm x 16.30cm x 4.36cm (8.45" x 6.42" x 1.72" ) W, D, H
Shipping Dimensions: 34.50cm x 16.50cm x 5.20cm (13.58" x 6.50" x 2.05" ) W, D, H

GENERAL

Product Weight: 0.9kg (2lbs) approx
Shipping Weight: 1.4kg (3.1lbs) approx

Kramer KDS-100