Blackmagic Design ATEM 2 M/E Advanced Panel 30 - SWPANELADV2ME30

Blackmagic Design ATEM 2 M/E Advanced Panel 30 - SWPANELADV2ME30

The 2 M/E model features 2 M/E rows with 30 input buttons and 3 independent system control LCDs for each row. Plus each row can control up to 4 M/Es in larger switchers. Both rows and all input buttons include LCDs for custom labelling. Each row also includes an independent select bus!

FEATURES

Panel for ATEM Constellation Switcher
2 x M/E Rows, 30 x Input Buttons Each
3 x System Control LCDs for Each Row
High-Quality Buttons/Knobs/Controls
4 x GbE Ethernet Ports with Lookouts
Custom Labeling, Redundant Power Supply
12 On-Air Indicators, 30 Cross-Points
3-Axis Joystick, Keypad, 2 x Fader Bars
USB Type-C Input for Firmware Updates

For the ultimate in professional control, you can add an optional ATEM Advanced Panel! Although you can use ATEM Constellation with the software control panel, using an ATEM Advanced Panel is so much faster!

The ATEM Advanced Panels opens up the power of your ATEM Constellation because it gives you an enormous amount of control, allowing you to set up more complex effects.
It's also a nicer way to work because you have physical broadcast quality buttons, knobs and a t‑bar fader so you can access all features in the switcher, all at the same time.
Imagine using the 4 M/E models to access all M/Es simultaneously, with an input button for every single SDI source on the ATEM Constellation switcher!

The 2 M/E model features 2 M/E rows with 20 input buttons and 2 independent system control LCDs for each row. Plus each row can control up to 4 M/Es in larger switchers. Both rows and all input buttons include LCDs for custom labelling. Each row also includes an independent select bus!

ATEM Constellation has been designed to give you the most advanced live switching workflow.
Internally, ATEM Constellation has separate programs and preview buses that you can use to quickly and accurately switch sources. ATEM Constellation lets you see your preview bus selection by using an aux output or on the multi-view.

Then all you need to do is make selections on the preview bus of the advanced panel, which will appear on your preview screen, allowing you to see your source before it goes on air.
Then you can bring the source online by pressing cut or auto! You can also switch sources on the program bus if you need them to go live immediately!

Get total control over your transitions with a dedicated hardware button for each transition type! When selecting transition types, a system control LCD screen will display the options for that transition, so you can change its parameters without navigating through complex menus.

It's all instantly available! That gives you multiple ways to switch. Simply select a new source on the preview bus, then press CUT for a cut transition, or AUTO to use the selected transitions such as mix, dip, wipe or DVE! You can even cut directly on the program bus.

With ATEM Advanced Panels you get all the controls you need to access all transition types fast.