SKU
BKM-250TG

Used Sony BKM-250TG 3G/HD/SD-SDI Input Apator Card

We currently have 1 Sony BKM-250TG 3G HD SD-SDI Input Adaptor Card in as new condition no box for sale

Preorder
Cashback
£420.00 £350.00

Used Sony BKM-250TG 3G/HD/SD-SDI Input Apator Card - 

We currently have 1 Sony BKM-250TG 3G HD SD-SDI Input Adaptor Card in as new condition no box for sale

The BKM-250TG 3G-SDI interface board is compliant with the SMPTE 425 standard and requires only one single SDI cable to transmit up to 10-bit 4:2:2 1080P/60P video signals. This optional 3G-SDI interface offers a simple cabling solution for groups of video equipment rack-mounted behind an editing room.

SPECIFICATIONS

Input/Output
Serial Digital Interface BNC x 2
Digital component signals Sampling frequency
3G-SDI: Y/Cb/Cr: 148.5 MHz/74.25 MHz/74.25 MHz
G/B/R: 148.5 MHz/148.5 MHz/148.5 MHz
HD-SDI: Y/Cb/Cr: 74.25 MHz/37.125 MHz/37.125 MHz
SD-SDI: Y/Cb/Cr: 13.5 MHz/6.75 MHz/6.75 MHz
Monitor Out BNC x 2
Output signal amplitude: 800 mVp-p 10 %
Output impedance: 75 ohms unbalanced
Transmission Distance 3G-SDI: 70 m (approx. 230 ft) max. (When using 5C-FB coaxial cables (Fujikura. Inc.) or equivalent.)
HD-SDI: 100 m (approx. 328 ft) max. (When using 5C-FB coaxial cables (Fujikura. Inc.) or equivalent.)
SD-SDI:200 m (approx. 656 ft) max. (When using 5C-2V coaxial cables (Fujikura. Inc.) or equivalent.)
General
Voltage +5 V, +3.3 V (supplied from the main unit)
Power Consumption Approx. 4 W
Operating Temperature 0C to 35C (32F to 95F)
(Optimum temperature 20C to 30C (68F to 86F))
Operating Humidity 0% to 90% (no condensation)
Operating Pressure 700 hPa to 1060 hPa
Storage and Trans. Temperature -20C to +60C (14F to 104F)
Storage and Trans. Humidity 0% to 90%
Storage and Trans. Pressure 700 hPa to 1060 hPa
Dimensions (W x H x D) 100 x 20 x 162 mm (4 x 13/16 x 6 1/2 inches)
Mass Approx. 270g (9.5 oz)