SKU
LUM-313G

TVLogic LUM-313G 31.1-inch True 4K Monitor with 12G-SDI & HDMI 2.0

31.1” True 4K Monitor with 12G-SDI & HDMI 2.0

31"DCI (4,096 x 2,160) 350 Nit LCD monitor, input :  2x12G -SDI, 4 x 3G-SDI,HDMI 2.00  FULL SCREEN FHD Single Mode Display 

Preorder
Cashback
Call for Price
Did you find this item priced lower than £7,645.00 somewhere else? Yes

TVLogic 31.1" True 4K Monitor with 12G-SDI & HDMI 2.0LUM-313G

The LUM-313G is a 31.1" native 4K resolution(4096×2160) monitor with a maximum luminance of 350nit, the contrast ratio of 1500:1, wide colour gamut and wide viewing angle. Equipped with 4 BNCs (2×12G-SDI + 2×3G-SDI) and HDMI 2.0 interface, it supports various video formats up to 4K/60p through single-link 12G-SDI, Quad 3G-SDI and HDMI 2.0. In addition to various professional features such as Waveform monitor and Vectorscope, the LUM-313G provides HDR emulation function with HDR EOTFs of PQ, HLG and SLog3. More camera-specific HDR logs and gamuts will be supported by a firmware update.

Audio Level Meter DisplayAudio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Blue Only / Mono

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones(tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

H/V DelayH/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the centre of the screen.

MarkerMarker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line colour and curtain transparency selection. A User Marker is available if any of the standard markers fits your requirements.

Time Code DisplayTime Code Display

Displays the Timecode information on the screen.

User Aspect

Adjusts the Width /Height display ratio.

VavariousScan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector ScopeWaveform/VectorWaveform/Vector

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

SPECIFICATIONS

Display Spec.

 Size  31.1"
 Resolution  4096 X 2160 (17:9)
 Pixe Pitch  0.1704mm
 Color Depth  1.07B
 Viewing Angle  178°(H) / 178°(V)
 Luminance  350cd/m2
 Contrast Ratio  1,500:1
 Display Area  698(H) x 368(V) mm
 

Input

 4 X BNC  12G-SDI A/B Channel Input, 3G-SDI C/D Channel Input
 1 X HDMI  HDMI Input
 

Output

 4 X BNC  HD SDI A/B/C/D Channel Output
 

Audio

 Audio Out  Analog Stereo (Phone Jack), Internal Speaker(Mono)
 

FPGA Functions

,  Blue Only,  H/V Delay,  Marker,  Mono,  User Aspect,  Various Scan Modes,  Waveform/Vector,  SingleMode
 

Closed Caption

 
 

Calibration

 TVLogic Color Calibration Utility, 3D LUT & Adjustable Gamma, 3rd Party 3D LUT Import and Export
 

Other Functions

 REMOTE   TVLogic’s specification
 USB   Firmware update by USB cable   Firmware update by USB memory stick
 Ethernet
 Conversion   SDI-to-SDI,
 

Options

  Carring Case,