Theatrixx DMX/RDM Splitter/Isolator - XVVR-OPTO3
Theatrixx - DMX Splitter/Isolator 1:8 + Thru - RDM - XLR3 (1RU)
Theatrixx DMX/RDM Splitter/Isolator - XVVR-OPTO3
The DMX/RDM splitter is a high quality, rugged distribution device for your DMX-512 and RDM signals. Available in both traditionnal 1RU, 8 channel form factor, or as a modular, 3 channel unit compatible with Theatrixx’s Award-Winning 8-Bay Reversible Converter System, the product opens up interesting
possiblities for high-universe count, high density configurations. For maximal compatibility, the device is offered with a choice of 3-pin or 5-pin XLR connectors.
The input and each output are optically isolated up to 1000 volts, ensuring line failures are contained and do not take down the whole network. RDM data is forwarded to each port, and a special “Timing Safe Mode” bypasses RDM transmissing and boosts the DMX signal quality to ensure compatibility with older-generation fixtures. It is also a handy troubleshooting feature that can be easily switched on or off at the push of a button.
FEATURES
Compatible with DMX-512A (RDM) and DMX-512 (1990).
Comprehensive protection against severe electrical faults on
DMX lines.
Switchable DMX Termination on input.
Timing-safe mode filters and retimes incoming signal.
Fully isolated input and output ports.
Multi-function LED status indicator for each port.
Available both as a standalone rack-mountable device or as part of
the xVision Reversive Converter modular system.
SPECIFICATIONS
Inputs/Outputs
Input
3-pin XLR male
Loop-Thru
1 x 3-pin XLR female
Isolated Outputs
8 x 3-pin XLR female
Supported Signals
DMX Termination
Switchable on/off
RDM Support
Yes
RDM Bypass
Switchable on/off
Port Isolation Voltage
Up to 1kV
Timinig Safe Mode
33 FPS, 512 Slots, 88us Break, 44 us MAB
Physical Specifications
Height
43.43 mm (1.7 in) – 1 RU
Depth
178 mm (7 in)
Width
482.6 mm (19 in)
Weight
3.75 kg (8.25 lbs)
Environnemental Specifications
Relative humidity
0% to 90% RH non-condensing
Operating temperature
0-40 °C
Power Requirements
Power Supply
Built-in power supply
PowerCon with loop thru
Power Consumption
15W
Voltage Range
100-240V, 50-60Hz
WHAT'S IN THE BOX
Theatrixx DMX/RDM splitter/isolator 1:8 + thru. 1RU XLR3
AC Mains to PowerCON True1 cable (1.5m, specify plug type at ordering, extra
power cable on request)