Sony SMAD-P3D Dual Channel MI Shoe Adapter

Sony SMAD-P3D Dual Channel MI Shoe Adapter

The 2-channel wireless receiver URX-P03D can be attached to camcorders or interchangeable-lens cameras that have an MI (Multi-Interface) shoe using the 2-channel MI shoe adaptor SMAD-P3D. This eliminates the need for connecting cables. By using the MI shoe adaptor, audio signals can be transmitted from the wireless receiver to a camera. In addition, the wireless receiver can get power from the camera, and the camera can control power ON/OFF, unifying power management.

The SMAD-P3D is applicable to XDCAM Camcorder PXW-X70, PXW-X160, PXW-X180, PXW-X280, PXW-X200*, PXW-Z150**, PXW-FS7, PXW-FS5 and PXW-FS5K, NXCAM Camcorder HXR-NX100 and HXR-MC2500, Handycam FDR-AX100 ***, NEX-VG900*** and NEX-VG30 ***, interchangeable lens digital camera α7***, α7R ***, α7S ***, α7 MarkⅡ ***, α7R MarkⅡ ***, α7S MarkⅡ ***, α99 ***, α6000***, α6300 ***, plus Cyber-shot DSC-RX10 ***, DSC-RX10 MarkⅡ*** and DSC-RX10 MarkⅢ*** (as of July 2016).

* PXW-X200 firmware should be upgraded to Ver.2.00 or later for using SMAD-P3D.

** When using with PMW-Z150 operated by AC power, please set a battery on the camera. Without a battery, operation of the power supply function and the power ON/OFF control function is not guaranteed. Or else, insert new AA alkaline batteries in the receiver and set the receiver’s power select (PWR SOURCE) menu item to BATT ONLY mode to avoid an unexpected shutdown of the camera or data loss.

*** When used in conjunction with these specific camera models, operation of the power supply function and the power ON/OFF control function is not guaranteed. Insert new AA alkaline batteries in the receiver, and set the receiver’s power select (PWR SOURCE) menu item to BATT ONLY mode. When using other modes, the camera may shut down unexpectedly and data may be lost depending on the operating conditions.

• No need for separate XLR cable

  Using an MI Shoe connection, the 2-channel audio signal from wireless receiver URX-P03D can be input to the camera without XLR cables.

• Power can be supplied by camera

  Power can be switched on and off from the camera/camcorder.