Sonifex 4 Input 4 Output Dante Interface PoE - AVN-AIO4
£758.17
£631.81
SKU
AVN-AIO4
The AVN-AIO4 audio converter and interface converts up to four analogue inputs and four analogue outputs to and from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via POE (Power Over Ethernet).
Sonifex 4 Input 4 Output Dante Interface PoE - AVN-AIO4
Dante Multi-Channel Audio Interfaces
All analogue inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock.
- 4 x balanced analogue inputs on XLR.
- 4 x balanced analogue outputs on XLR.
- 1 x RJ45 Dante connector (100Mb/s Ethernet Port).
- POE, Link, and Clock LED status indicators.
- Configuration using Dante Controller.
- AES67 operation & Dante Domain Manager compliant.
- Powered by PoE.
- 1U 19" rack-mount form factor.
SPECIFICATIONS
Network and AoIP |
|
AoIP Standard: | Dante |
Number of Channels: | 4 receive, 4 transmit |
Number of Streams: | 4 receive, 4 transmit |
Sample Rates: | 44.1kHz, 48 kHz, 88.2kHz or 96kHz |
(Note: 2 channels I/O only when >48kHz. Either 4 inputs or 4 outputs at 96kHz, can be configured on request with a separate firmware download). | |
Format: | Linear PCM, 16, 24 or 32 bit |
AES67 Support: | Yes |
Connectivity: | 1 x RJ45 |
Speed: | 100Mbps |
Dante Domain Manager Ready: | Yes |
Audio Input Performance Specifications |
|
Parameter | Line Input |
Input Impedance: | >20kΩ balanced |
0dBFS line-up: | User Selectable +12dBu/+18dBu/+24dBu balanced |
Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
THD+N: | <-110dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
Noise: | -110dBFS, 20kHz BW, Rs=200Ω |
Crosstalk: | <-100 dB |
Common Mode Rejection: | >60dB @ 1kHz |
Audio Output Performance Specifications |
|
Parameter | Line Output |
Output Impedance: | <50Ω balanced |
0dBFS line-up: | User Selectable +12dBu/+18dBu/+24dBu balanced |
Frequency Response: | 20Hz to 20kHz, +0/-0.5dB |
THD+N: | <-107dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
Noise: | -107dBFS, 20kHz BW |
Crosstalk: | <100dB |
Balanced Line Input XLR Pinout |
|
Pin | Function |
1 | Chassis Ground/Screen |
2 | Input Phase/Positive |
3 | Input Non-Phase/Negative |
Balanced Line Output XLR Pinout |
|
Pin | Function |
1 | Chassis Ground/Screen |
2 | Output Phase/Positive |
3 | Output Non-Phase/Negative |
PoE Power |
|
Standard | 802.3af |
Class | 0 |
PD Power Range | 0.44 W to 12.94 W |
Typical PSE Power Usage | 4.5 W |
Max PSE Power Usage | 15.4 W |
Equipment Type |
|
AVN-AIO4: | 4 Input, 4 Output Dante® Interface, PoE |
Physical Specification |
|
Dimensions (Raw): | 48cm (W) x 11cm (D) x 4.3cm (H)(1U) 19” (W) x 4.3” (D) x 1.7” (H) |
Weight: | Nett: 0.9kg Gross: 1.4kg Nett: 1.9lbs Gross: 3.1lbs |