SKAARHOJ ETH-B4 Link - ETH-B4-LINK-V1 (BUILT TO ORDER)
Similar to SDI-B4 Link but the data input is via network instead of SDI.
SKAARHOJ ETH-B4 Link - ETH-B4-LINK-V1
Similar to SDI-B4 Link but the data input is via network instead of SDI. The protocol is also Blackmagic Camera Control, but over UDP (“UDP Camera Control”) and typically served by a SKAARHOJ controller. Has an incredibly light and compact form factor.
With the SKAARHOJ ETH-B4 Link the iris control data is sent separately from the camera control data over ethernet instead of over SDI. The ETH-B4 Link has a camera selector switch that sets it’s camera ID filter as well as its IP address and the iris data it receives is output on the Hirose-12 connector. It also features a tally lamp (red/green) and a relay output (PGM tally out).
Outstanding differences from previous or similar versions
The ETH B4 Link is a format converter that allows all SKAARHOJ controllers to connect to B4 equipped broadcast lenses
FEATURES
- Hirose 12-pin connector
- Tally on small LED
- Set camera number via selector switch
- Program tally from 3-pin phoenix connector: Ground, IO, 12V (VIN)
WHAT'S IN THE BOX
- 12V Power Supply:
- Manufacturer: PHIHONG, Model Name: PSA15R-120P, Output: 12V/1.25A, Cable Length: 1.5m, Adapter type: EU, GB, US, AU depending on shipping country, DC Output Connector: 5.5mm x 2.1mm x 10mm Center Positive
- USB Programming Cable:
- Type: USB 2.0 A-Micro B, Length: 1m
Recommended cables (not in the box)
- LAN Cat 6 S/FTP or better