SKU
506978

Sennheiser HMDC 27 Broadcast Headset - 506978

Register on-line prior to purchasing and receive additional discount on this product

LET´S SET BROADCAST-STANDARD TO A HIGHER LEVEL! The HMDC 27 is a closed, circumaural broadcast headset with active noise reduction. It is an ideal choice for commentator and camera work/ Backstage in very loud environments. For ease of operation, the active noise reduction does not require batteries but is powered via the P48 power supply from the broadcast desk. (P12-P48 as per DIN_EN 61938)

Preorder
Cashback
£539.00 £449.17
Did you find this item priced lower than £449.17 somewhere else? Yes

Audio headset, NoiseGard 600/200 Ω (ANR on/off), circumaural, dynamic microphone, hypercardioid, with connection cable II-X3K1 - 506978

The new HMD 27-series invites the Broadcast Commentators and Audio Engineers to experience the highest level of wearing comfort. The top-of-the-line model is the HMDC 27, which features NoiseGard™ (active noise reduction) to perform well in very loud environments. By actively reducing the noise level by additional 15dB this headset increases intelligibility while at the same time protecting the user’s hearing and avoiding stress and fatigue due to noise. NoiseGard™ does not require the usual batteries but is conveniently powered via the microphone power supply from the broadcast desk or intercom system. (Phantom powered P48). The headset is similar to the HMS 26series equipped with the automatically opening two-piece headband, hence no pressure on the sensitive fontanelle. For those users who still prefer a conventional headband, a wide headband padding is included that converts the two-piece headband into a compact single piece.

Key Features

  • Active noise compensation (NoiseGard™) additionally reduces noise by up to 15 dB. No batteries required: Power supply via microphone bias voltage from the commentator’s unit (P12-P48 as per DIN_EN 61938)

  • Highest wearing comfort due to the lightweight circumaural design and the splitted headband (no pressure on the sensitive fontanelle)

  • Accurate and linear sound reproduction for very demanding monitoring

  • Dynamic Microphone, which stands out due to a strong and powerful sound pattern for an audio transmission in highest broadcast quality even in noisy environments

  • ActiveGard© (on/off switch) for protected hearing against noise peaks > 110dB

  • Modular concept of different cables and boom arms to offer highest flexibility

  • Cables of the cable 26-II series are compatible

  • Swiveling ear cap for single sided listening

  • Microphone can be worn either on right or left hand side

  • Wide headband padding is included that converts the two-piece headband into a compact single piece

  • Impedance
    64 ohms
  • Frequency response (Microphone)
    40 Hz – 18 kHz
  • Transducer principle (Microphone)
    dynamic
  • Frequency response (Headphones)
    8 Hz – 18 kHz
  • Microphone
    BMD 434
  • Max. sound pressure level
    ActiveGard™ Limiter off: 128 dB SPL @ 1 kHz
    ActiveGard™ Limiter on: 110 dB SPL @ 1 kHz
  • Contact pressure
    approx. 3.3 N
  • Ear coupling
    circumaural
  • Pick-up pattern
    Hyper-cardioid
  • Microphone sensitivity
    0.5 mV/Pa @ 1 kHz
  • Maximum sound pressure level (passive)
    128 dB SPL @ 1 kHz
  • ActiveGard®
    110 dB SPL @ 1 kHz
  • Distortion
    < 0.1% @ 1 kHz, 100 dB SPL
  • Transducer principle (headphones)
    dynamic, closed
  • Weight w/o cable
    approx. 240 g