SKU
086003

Rycote Modular Windshield WS 2 Kit 086003

£408.24 £340.20
Did you find this item priced lower than £340.20 somewhere else? Yes

Rycote Modular Windshield WS 2 Kit 086003

 

The Modular Windshield WS 2 Kit is suitable for small diaphragm condenser microphones from 121mm up to 160mm in length with a 19-25mm diameter and a 3-Pin XLR connection.

 

Main Benefits:

  • Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations
  • The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology

The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.
This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.

Modular Suspension

Our suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.
Windshield

The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.

Windjammer

The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting. Modular Windshield Kits, including zipped Windjammer are also available on request.


TECH SPEC

Windshield Body Length: 210 mm

Total Windshield Length: 320 mm (includes the End Caps)
Height of Windshield: 100mm
Windjammer Fur Length: 40mm
Windjammer Fur Colour: Grey
Microphone Connector: XLR-3F
Max Wind-noise Attenuation: 50 dB


Finding the correct Windshield Kit will depend on the type, length and diameter of the microphone.

Because the whole microphone is encased in a windshield basket the total length of the microphone including the XLR cable must be accounted for, this means adding 50mm to the length of the mic.

For a windshield to work effectively the microphone should be mounted centrally within the windshield, therefore the microphone + XLR length should approximately equal the windshield body length. The body length of our windshields is the total length, excluding end caps.


COMPATIBILITY


AKG CK 1 451 The classic cardioid capsule for the CMS range. The pattern was remarkably consistent across the frequency range. The 1S had a rising...  
AKG CK 1 460 A remote cardioid capsule introduced for use with the C 460 B preamplifier.  
AKG CK 91 SE300 B The flat frequency response and uniform polar pattern of the CK 91 make it ideal for general applications where suppression of off-ax...  
AKG CK 92 SE300 B The CK 92 offers exceptionally neutral presentation of a source in its ambient sound field, providing uniform results regardless of t...  
AKG CK 93 SE300 B Similar to the CK 91, the CK 93 provides additional attenuation of 90 degree off-axis sounds. In addition to a higher ratio of direct...  
Audio-Technica AT 4021 Description  
Audio-Technica ATM 33a Ideal for acoustic guitar, percussion, overheads, vocals and more, the ATM33a excels in both studio and stage applications. It offers...  
BeyerDynamic M 160 Double ribbon dynamic microphone with unique acoustic characteristics, especially suitable for use when recording digitally.  
BeyerDynamic M 201 A very sensitive dynamic microphone with an integral humbucking transformer to eliminate mains-borne interference when working near c...  
BeyerDynamic MC 713 Description  
BeyerDynamic MC 723 Description  
DPA 4006 The 4006 is phantom powered, which, together with its extended range of acoustic pressure equalisers and different protection grids, ...  
DPA 4017C Setting new standards for compactness within shotgun microphones and their applications, the modular 4017C is an exceptionally short ...  
Schoeps CMC Series Description  
Sennheiser MKH 20 An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output, switched pre-attenu...  
Sennheiser MKH 30 An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output. Switchable pre-atte...  
Sennheiser MKH 40 An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output. There are switches ...  
Sennheiser MKH 50 An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output, switchable bass rol...