Panasonic AK-UCU600ESJ Camera Control Unit (CCU) - AK-UCU600ESJ

£15,410.40 £12,842.00

SKU

AK-UCU600ESJ

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Panasonic AK-UCU600EJ Camera Control Unit (CCU) - PAN-AK-UCU600EJ

FEATURES
Contains a dual UHD 12G-SDI system, and supports 3G -SDI quad link and two-sample interleave
Optical fibre transmission of uncompressed video signals over a distance of approx. 2,000 m between the camera and CCU
Supports TICO over SDI (4K over 3G-SDI) output (4K signal can be transferred by a conventional 3G-SDI cable)
Supports HDR/SDR simultaneous output and HDR BT2020/B709 simultaneous output
Supports IP streaming (100 Base-T)

With the AK-UCU600 Camera Control Unit (CCU), uncompressed long-distance transmission of 4K/HD video signals via optical fibre is supported. The AK-HRP1000GJ/1005GJ Remote Operation Panels (ROP) are equipped with a colour LCD display that provides excellent visibility and functions for quick response. This system achieves high-quality video and excellent operability. In cases where power is supplied by the CCU, it is possible to transmit at a long distance of up to approx. 2,000 m between the camera and the CCU. The distance can be extended up to 10,000 m by providing a local power supply at the camera head and using general-purpose single-mode optical fibre. Between the CCU and the ROP, in addition to a dedicated serial line, an IP connection via LAN cable is also supported.

Specifications

SPECIFICATIONS

Power Supply	100 V - 240 V AC, 50 Hz/60 Hz
Power Consumption	500 W (Without camera connected: 90 W)
Capacity for Supplying Power to a Camera	240 V AC (tolerance: 5%), 1.46 A , 50 Hz/60 Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% to 90% (no condensation)
Weight	Approx. 8.8 kg (19.4 lb)
Dimensions (W x H x D)	424 mm x 88 mm x 401 mm (16-5/8 inches x 3-7/16 inches x 15-13/16 inches) (excluding protrusions)
Video Output	"3G/HD/SD-SDI: 7 lines (embedded audio is supported only for HD signals) HD/SD-SDI: 1 line (shared with picture monitor output*1 ;embedded audio is supported only for HD signals)"
HD TRUNK/TICO Output	HD-SDI: 1 line (HD TRUNK output) 3G/HD-SDI: 1 line (TICO output)
Return Input	3G-HD/HD/SD-SDI: 4 lines (RET1 input has active-through output) Analog composite: 1 line
Prompter Input	HD-SDI: 1 line (with active-through output) Analog composite: 2 lines (through output of 1 and input of 2 share the connector* 1 ) It is not terminated when the unit is turned OFF. No through output.
Reference Input	BB (black burst) / tri-level*2 : 1 line (automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output)
Microphone Output	0 dBm/600 Ω, 2 lines (XLR, 3-pin, male)
Communication	Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) / 1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines* 1 PGM input (0 dBm/600 Ω) : 2 lines Tally input (red, green, yellow) : 1 input each
AUX	WFM control 6-bit (open collector output, terminal shared with camera microphone gain setting1 ) Camera microphone gain setting input 5-bit (photo-coupler input, terminal shared with WFM control 1 ) Down-conversion system setting input 2-bit (photo-coupler input)
TRUNK	RS-422 / RS-232C 2 lines* 1
FRONT ROP	RS-422 1 line, 16 V DC output (only one of this and REAR ROP can be selected at one time via the menu or the [ROP FRONT/ REAR] selection switch on the front panel)
REAR ROP	RS-422 1 line, 16 V DC output (only one of this and FRONT ROP can be selected at one time via the menu or the [ROP FRONT/REAR] selection switch on the front panel)
MSU	RS-422 1 line, GPI for control
*LAN TRUNK 3**	LAN connection with camera side via an optical cable* 4 1 line, 100BASE-T, 1000BASE-T
LAN	Personal computer connection for distribution via the Web* 4 1 line, 10BASE-T, 100BASE-TX (use a crossover cable when connecting directly with a personal computer)

What's in The Box

WHAT'S IN THE BOX
1x Panasonic AK-UCU600EJ Control Unit

Related products

Check items to add to the cart or