Marshall Electronics V-LCD70-AFHD-SL 7-inch 1024 x 600 Camera-Top Monitor with Sony Battery Mount

£755.04 £629.20
Call for Lead Time on this Product

7" High Resolution 1024 x 600 Lightweight Camera-Top Monitor with Multiple Inputs

Marshall Electronics V-LCD70-AFHD-SL 7-inch 1024 x 600 Camera-Top Monitor with Sony Battery Mount



  • Multiple inputs including HDMI, 3GSDI, Component and Composite
  • Three colour tally (Red, Yellow, Green)
  • 1/4-inch mounting on 4 sides plus VESA mount
  • Light-weight for comfortable camera-top use
  • Audio level display from HDMI or SDI inputs
  • On-screen framing marks
  • 4-pin XLR for ENG power supplies
  • Power adapter included

Special features including:

  • Picture-in-Picture
  • Image flip
  • False colour level indication
  • Peaking filter focus assist
  • Zebra filters
  • Screen Markers

The V-LCD70-AFHD includes a wide range of professional features including multiple inputs, Picture-in-Picture, Image Flip, Screen Markers, Peaking Filter, False Color and Zebra filters. The screen is a bright 500 cd/m² ith a 700:1 contrast ratio. The menu is fully accessible from the front of the monitor, where adjustments can be made to colour, exposure, picture orientation, or the aspect ratio of the image can be adjusted from full screen to 4:3, 14:9 and 16:9.

The V-LCD70-AFHD is designed for the videographer who moves between HD, 3G, and analogue formats and needs a field monitor that can adapt to every situation.


Panel Number of Panels 1
Panel Size 7.0” Diagonal
Resolution 1024 x 600
Aspect Ratio 16:9
Active Area 153.6 x 90 mm
Brightness 500 cd/m²
Contrast 700:1
Color Gamut YUV, RGB
Viewing Angles (CR>=10) 170° x 170°
Backlight type LED
Adjustable Backlight No
Features Frame Rates 1080p/1080i/720p/625i/525i
Loss of Input Curtain Yes
Color Temperature D65, D55 and D93
Image Flip Yes
False Color Yes
Peaking Filter Yes
HDMI Ratio Auto Yes
Pixel to Pixel No
Pre-set Gamma points Yes
Self-Sensing Yes
Modular Input Slot No
Re-clocked/Re-Shaped Yes

Video Input Connectors
YPbPr Yes
3G-SDI Yes
Optical No
Video Output Connectors CVBS Yes
YpbPr Yes
3G-SDI Yes
Input Status Display Yes
Audio Outputs Embedded Audio SDI Yes
Headphones 3.5 mm Yes
Input Status Display Yes
Audio Bars Yes
Channels Yes
Control Inputs Tally / GPI Yes
RS-485/422 w/ Loop Through No
Ethernet No
Controls on front Panel Yes
User-Defined Function Buttons Yes
RotoMenu™ Control No
Handles No
Power Voltage 12 VDC
Consumption 20W
Power Switch Yes
Connector 5.5mm/XLR
Compliance Compliance FCC-Class A, CE, RoHS
Environmental Operating Temperature -4° F to 122° F
Storage Temperature -22° F to149° F
Unit dimensions 7.50" (W) x 5.57" (H) x 1.25" (D)
Weight (Main Body) 1 lbs
Mounting ¼”-20 Mounting Bracket
Available Battery Adapter Configurations User-Replaceable Battery Adapters
"CM" - (Canon), "JM" - (JVC), "PM" - (Panasonic), "PV" - (Panasonic), "SB" - (Sony B series), "SL" - (Sony L series), "SM" - (Sony M series), "AB" - (Anton/Bauer), "VM" - (V-Mount)

False Color Filter

Color filter scale
The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment.

To best utilize this feature, you must understand the color chart and have a basic understanding of camera exposure. Normally, when shooting subjects like people, it is common practice to set exposure of faces to the equivalent of approximately 56 IRE. The False Color filter will show this area as the color PINK on the monitor. Therefore, as you increase exposure (open the IRIS), your subject will change color as indicated on the chart: PINK, then GREY, then a few shades of YELLOW. Overexposed subjects (above 101 IRE) on the monitor will be shown as RED. In addition, underexposed subjects will show as DEEP-BLUE to DARK-BLUE, with clipped-blacks indicated with a FUCHSIA-like color. Lastly, the color GREEN is used to indicate elements of the image that are approximately 45 IRE. This represents a "neutral" or "mid-level" exposure commonly used for objects (not people).

Peaking Filter

The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, all color will be removed from the display and a black-and-white image will remain. The internal processor will display RED color on the screen where sharp edges appear. When the camera operator adjusts (or "racks") the focus control (on the camera lens), different parts of the image will have RED colored edges. This indicates that this portion of the image is sharp or in focus. Final focus is achieved by racking the camera lens focus control back and forth until the desired portion of the image has RED colored edges. Please note that this feature is most effective when the subject is properly exposed and contains enough contrast to be processed.

Quick Change Camera-Top Battery System

No Tools Required

Easily change the battery plate on your camera-top monitor using Marshall's Quick Change Camera-Top Battery System. The system consists of a base plate that mounts onto the back of the monitor and accepts different types of battery plates. The base plate and battery plate disengage with the twist of a single screw. No tools are required. Simply turn the screw to remove one battery plate and replace it with another.

This system is perfect for rental houses, schools, and production studios where multiple cameras may be used with one monitor. When a user switches cameras, the battery plate on the monitor can be replaced in seconds. Marshall's Quick Change Battery System is designed save valuable time when switching easily between different pieces of equipment.

Base Plate (Part# 0032-1308-A) is supplied with: V-LCD56MD, V-LCD70MD, V-LCD90MD, M-CT710, V-LCD71MD and V-LCD70-AFHD