Kramer VP-558 11x4:2 Presentation Boardroom Router / Scaler System
£5,984.10
£4,986.75
SKU
VP-558
Kramer VP-558 11x4:2 Presentation Boardroom Router / Scaler System - VP-558
FEATURES
- Pix−Perfect™ Scaling Technology
- HDBaseT Range − up to 70m (230ft)
- 4x1 USB Switcher
- OSD (On Screen Display)
- Front−panel LCD − For status display
- Audio DSP Features
- Input/Output Audio Level Adjustment
- Selectable Microphone Talkover or Mix Modes
- Built−in Power Amplifier
- Built−in ProcAmp
- Control − RS−232, Ethernet with built−in Web pages
- Size - 19” (2U) Rack "ears" included.
- Audio - U/B/D/E
The VP−558 is a high−performance 11x4 ProScale presentation scaler/matrix switcher that can output four independent scaled images. Each output includes an HDMI and HDBaseT connector. The product supports analog, digital and embedded audio. VP−558 features six HDMI inputs, four HDBaseT inputs, an analog VGA input, and a 4x1 USB switcher. VP−558 also includes a microphone input, independent stereo audio outputs, a monitor output, an amplified speaker output, and audio DSP features.
-
Pix-Perfect™ Scaling Technology - Kramer’s precision pixel mapping and high−quality full up− and down−scaling technology.
-
HDTV Compatible. HDCP Compliant.
-
Output Resolutions - Up to 1080p/UXGA.
-
System Range - For the HDBT inputs and outputs − up to 70m (230ft).
-
Cables - For optimum range and performance using HDBaseT™, use Kramer's BC−HDKat6a cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using non−Kramer CAT 6 cable may not reach these ranges.
-
4x1 USB Switcher - Can be set to follow the switching of the video layer or as an independent switcher.
-
OSD (On Screen Display) - For easy setup and adjustment, accessible via the front panel buttons.
-
Audio DSP Features.
-
Input/Output Audio Level Adjustment.
-
Selectable Microphone Talkover or Mix Modes.
-
Analog & Embedded Audio Support - For inputs and outputs.
-
Built-in Power Amplifier - 2x10W power amplifier with speaker outputs on a 4−pin terminal block connector.
-
Multiple Aspect Ratio Selections.
-
Built-in ProcAmp - Color, hue, sharpness, noise, contrast and brightness.
-
Built-in Web Pages - For easy setup and remote control.
-
Firmware Upgrade via the Ethernet
-
Multiple Control Options - Front panel buttons with OSD, RS−232, Ethernet and built−in Web pages.
-
Size - Standard 19" (2U). Rack "ears" included.
SPECIFICATIONS
INPUTS: | 6 HDMI connectors
|