IDX ENDURA V-Mount Plate with Dual 2-Pin D-Tap with 5V/7.4V regulator - P-V257
£199.87
£166.56
SKU
P-V257
IDX ENDURA V-Mount Plate with Dual 2-Pin D-Tap with 5V/7.4V regulator - P-V257
FEATURES
- 2-Pin D-Tap DC Out / DigiView
- P-V2 Plate Series Variation
- Combines V-Mount Batteries to Cameras
- V-Mount Connection - Precise DC Power
- Battery Level Indication
- 12V to 5V/7.3V Conversion
- Dual D-Taps Included
- Power Output - 50W
- Dimensions - 3.25 x 5.59 x 0.47"
- Supports Camera Input Cables
P-V257 converts 12V to 5V/7.3V and uses ENDURA batteries. Choose between the two voltages with a convenient power output switch located on the side below the D-Tap connector used for 5V/7.3V regulated power. Ancillary gear, such as lights, can be powered via the second unregulated 2-Pin D-Tap on the opposite side of the plate. its unregulated battery throughput voltage output can be as high as 16.8V with IDX Li-Ion batteries.
- Allows direct mounting of IDX ENDURA batteries to the back of a wide range of professional 12V cinema cameras (i.e. select Sony, AJA, Panasonic, JVC & Ikegami cameras)
- (1) 50W D-Tap Output (unregulated) available for powering cameras, onboard recorders, lights, monitors, ect.
- (1) 50W D-Tap Output (regulated 5V/7.4V via switch) available for powering select cameras(can be combined with the following cables to power the following cameras:
C-EOSC – use with Canon EOS Series 7D/5D Mark II
C-JVCC – use with JVC GY-HM Series
C-PANCAVC – use with Panasonic HMC Series & AG-AF100
C-PANCP2 – use with Panasonic HPX, HVX Series
C-CANC – use with Canon XL, XH Series) - Able to be mounted onto the IDX A-CP(A), TA-CA2 or any other mounting plates on industry standard rail systems
- Multiple mounting holes for universal camera connection
- Digital battery capacity data from the ENDURA ELITE and E-HL9 can be transferred through the P-V2 to compatible viewfinders found in most cameras. For accuracy and detail, remaining capacity is shown in steps of 1%
- Precise tooling and high-grade components enhance a design that offers a secure lock onto the battery for an exact fit connecting the mount’s power terminals
- Pre-wired power connectors fitted as standard, eliminating the need for manual screw connection
SPECIFICATIONS
Maximum D-Tap Output (primary) | 5V/7V regulated: 21W |
Maximum D-Tap Output (secondary) | 12~16.8V unregulated: 50W |
Dimensions | 82(W) x 142(H) x 12(D) inch. |
Weight | 181 grams approx. |
Included Accessories | M3 x 8 screws (qty. 4) |