FXLION BP-BV300 Bi-Voltage V-Mount Battery 293Wh

FXLION BP-BV300 Bi-Voltage V-Mount Battery 293Wh

FEATURES
5 Level Status indicator
LCD Display
Button to change the voltage between 14.4V and 28.8V
Compact and rugged design
Rubber corners for protection.

Compared to other products on the market, the Bi-Voltage V-Mount battery does not require a special V-Mount plate. The voltage can be changed conveniently at the touch of a button. This is very practical when working with high-power LED lights or cameras. An accidental change is impossible because we have built several safety mechanisms. Two buttons build the interface for changing the voltage.

Additional to the bi-voltage function, there are USB-C and D-Tap sockets available. USB-C Outputs can also act as charging inputs. So you can use any powerful USB-C charger and connect it to the battery. A stylish display shows you more information like Charging time, cycles and capacity of the battery. Like all our batteries, the Bi-Voltage V-Mount Battery has built-in protection circuits. It protects the battery and connected devices from overheating, overcharging, over-discharging, and over-current.

The battery is chargeable with all our V-Mount chargers. There are also Wall chargers for rentals available. The battery can be used in temperatures ranging from -20 to +55°C. And this is with a maximum loss in sub-zero temperatures of half the capacity. For more information about calculating your power needs, head over to our article about How To Choose the Right Battery.

How to use Fxlion Bi-volt V-mount Battery BP-BV300

1. How to use 14.4V
Bi-volt battery normal voltage 14.4V without any voltage selection. After confirm device input voltage is 14.4V, just attach bi-volt battery on device no need do any operation.
2. How to use 28V
*First make sure device input voltage is 28V high voltage.
*Press CHECK button to see battery power status. (this step can be left out) *Keep press SELECT button 3 seconds, display will show 28V and flash in red and white, press again SELECT button to confirm 28V high voltage, then display turn to 28V output status and flash.
--attach battery to device in 60 seconds, battery is output 28V and voltage is locked.
--if not attach battery to device in 60 seconds, can press CHECK button to switch back voltage to 14.4V, or after 60 seconds battery automatically switch back to 14.4V when flash stop.
*When power off, remove battery from device, battery voltage switch back to 14.4V from 28V.
*Repeat above operation when use 28V again.