This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.
SKU
TER-BOLT-995-EXDEMO

Ex Demo Teradek Bolt 3000 3G-SDI / HDMI Video Transceiver Set - TER-BOLT-995

EX DEMO Bolt 3000 3G-SDI | HDMI Video Transceiver Set SDI | HDMI Wireless Video Tranceiver Set

Preorder
Cashback
Free Delivery
1
Did you find this item priced lower than £6,295.00 somewhere else? Yes

Ex Demo Teradek Bolt 3000 3G-SDI | HDMI Video Transceiver Set - TER-BOLT-995 - 1 Only Available

SDI | HDMI Wireless Video Tranceiver Set - 


Ex Demo Teradek Bolt 3000 including: Accessories: 1 x Teradek Bolt 3000 Transmitter, 1 x Teradek Bolt 3000 Receiver, 2 x 2 Pin Lemo AC Adapter, 5 x Small Antenna's, 2 x Large Antenna's, 2 x Right angle Coil SDI Cables, 2 x HDMI Cables, 1 x D-Tap to 2-Pin Lemo Cable, 1 x USB3 Cable, 1 x Stand Mount, 1 x Thumbscrew mounting bolt, 1 x Hotshoe mounting bolt, 1 x Articulating arm attachment with hot shoe, 1 x Hard Case


FEATURES

 

  • SDI | HDMI Wireless Video Tranceiver Set
  • Longer Range
    Transmit visually lossless video up to 3000ft with no delay
  • 20mhz Channels
    Use more than twice as many Bolts in one location or avoid interference like never before
  • 2 New DFS Channels
    Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-in HDMI To SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
  • Individual Identity
    Easily identify which Bolt TX and RX work together with removable colored top plates
  • Support for Spectrum Analyzer
    You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.
  • Added Broadcast mode
    allows for longer range when used with directional antennas
  • Added three 'Quality' options to balance operation between maximum range and maximum overall quality
  • Supports Wired Pairing
  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine included