SKU
4166-OC-F-F00-ME

DPA Microphones d:fine CORE 4166 Slim Omni Flex Earset Mic 90 mm Boom Beige MicroDot - 4166-OC-F-F00-ME

Preorder
Cashback
£490.80 £409.00
Did you find this item priced lower than £409.00 somewhere else? Yes

DPA Microphones d:fine CORE 4166 Slim Omni Flex Earset Mic 90 mm Boom Beige MicroDot - 4166-OC-F-F00-ME

FEATURES

  • One-Ear Wearing Style
  • For Stage and Television
  • 20 Hz to 20 kHz Frequency Range
  • Omnidirectional Polar Pattern

Flex Omnidirectional Headset Microphone - DPA 4166-OC-F-C00-ME 4166 CORE Slim Omni Flex Earset Mic, 90 mm Boom, Brown, MicroDot 4166-OC-F-C00-MH 4166 CORE Slim Omni Flex Headset Mic, 90 mm Boom, Brown, MicroDot 4166-OC-F-C00-SE 4166 CORE Slim Omni Flex Earset Mic, 40 mm Boom, Brown, MicroDot 4166-OC-F-C00-SH 4166 CORE Slim Omni Flex Headset Mic, 40 mm Boom, Brown, MicroDot 4166-OC-F-C03-LE

The DPA d:fine™ Omnidirectional Headset Microphone takes head worn miniature mics to a different level and comes in a variety of versions: single ear, dual ear, long boom and short boom with beige, brown and black colour options.

The d:fine Omni Headset mic features a slim capsule with a linear frequency response and tiny visual footprint, allowing the wearer free movemebt of their head and face without looking bulky – perfect for theatrical or broadcast use, as well as a host of other applications where consistent high-quality audio is key.

SPECIFICATIONS

Directional characteristics:  Omnidirectional
Principle of operation:  Pressure
Cartridge type:  Pre-polarized condenser
Frequency range:  20 Hz – 20 kHz
Frequency range, ± 2 dB:  20 Hz – 20 kHz with 3 dB soft boost at 8 – 15 kHz
Sensitivity, nominal, ± 3 dB at 1 kHz:  6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted:  Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4:  Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):  Typ. 68 dB(A)
Total Harmonic Distortion (THD):  <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
Dynamic range:  Typ. 97 dB
Max. SPL, peak before clipping:  144 dB
Output impedance:  From MicroDot: 30 – 40 ohm. From DAD6001-BC: 100 ohm.
Cable drive capability:  Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Output balance principle:  Signal balanced with DAD6001-BC XLR adapter
Common Mode Rejection Ratio (CMRR):  > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
Power supply (for full performance):  Min. 5 V to max. 50 V through DPA adapter for wireless systems. 48 V phantom power ± 4 V with DAD6001-BC XLR adapter.
Current consumption:  Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter.
Connector:  MicroDot
Color:  Black, beige, brown, lime
Weight:  Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz).
Microphone head size (h x w x d):  9.5 x 5.3 x 2.9 mm (0.37 x 0.21 x 0.11 in)
Capsule diameter:  5.4 mm (0.2 in)
Cable length:  1.3 m (4.3 ft)
Cable color:  Black, beige, brown
Cable diameter:  1.6 mm (0.06 in)
Polarity:  +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Electro Magnetic Compatibility (EMC):  Fully compatible
Temperature range:  -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH):  Up to 90%

DPA d:fine™ Headset Mic - tips & tricks