DPA Microphones 4061-OC-C-B00 d:screet CORE 4061 Omni Mic Loud SPL Black MicroDot
The DPA d:screet™ CORE 4061 Omni Lavalier Microphone is acoustically identical to the d:screet™ 4060 Mini Omni Mic, but its sensitivity has been adjusted to accommodate higher sound pressure levels (SPLs).
The d:screet™ CORE 4061 Miniature Omnidirectional Microphone, (High SPL) can handle SPL up to 144 dB peak before clipping, making it ideally suited for use on very loud sound sources, such as some instruments and loud human voices.
At 10 dB less sensitive than the d:screet™ 4060, The d:screet™ CORE 4061 works well when used for hidden applications, for example when mounted on the head or forehead of a theatre or stage performer, which is naturally louder than what you would encounter with a chest placed lapel microphone.
This mic is available in four colours: black, brown, beige and white.
DPA Microphones 4061-OC-C-B00 d:screet CORE 4061 Omni Mic, Loud SPL, Black, MicroDot
- For Stage and Television
- Hardwired MicroDot Connector
- Low Sensitivity, Loud SPL
- Core Increases Mic Performance by 14 dB
The DPA d:screet™ series is the world’s leading mic for speech and vocal performance and has become the industry standard microphone in live theatre and broadcast. Now in its next evolution, the d:screet ‘CORE’ 4060 series of Miniature Omnidirectional Microphones bring extra clarity and detail to live speech and vocals, further distancing themselves from their competitors.
The DPA d:screet™ CORE 4061 Omnidirectional Lavalier Microphone was developed to withstand even the toughest of conditions in live performance, containing a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm.
The CORE by DPA d:screet™ 4061 is an omnidirectional microphone has sensitivity at all angles – which means it’s capable picking up sound equally from all directions.
A double vent protection system makes the mic greatly resistant to humidity and sweat, whilst its Kevlar-reinforced cable relief can withstand constant every-day twists, bends and pulls of any live performance. Adding further flexibility, the microphone can be configured to run easily and effortlessly with a huge range of the industry’s proffered wireless systems, but if you prefer, the mics is available with an XLR adapter to run via a wired system.
DPA d:screet™ CORE 4061 Specifications
|Principle of operation:||Pressure|
|Cartridge type:||Pre-polarized condenser|
|Frequency range:||20 Hz – 20 kHz|
|Frequency range, ± 2 dB:||Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz|
|Sensitivity, nominal, ±3 dB at 1 kHz:||6 mV/Pa; -44 dB re. 1 V/Pa|
|Equivalent noise level A-weighted:||Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))|
|Equiv. noise level ITU-R BS.468-4:||Typ. 38 dB (max. 40 dB)|
|S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):||68 dB(A)|
|Total harmonic distortion (THD) – Legacy:||< 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine|
|Total harmonic distortion (THD) – CORE:||< 1% THD up to 137 dB SPL peak|
|Dynamic range – Legacy:||Typ. 97 dB|
|Dynamic range – CORE:||Typ. 111 dB|
|Max. SPL, peak before clipping:||144 dB|
|Output impedance:||30 – 40 ohm|
|Cable drive capability:||Up to 300 m (984 ft)|
|Power supply:||For wireless For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.|
|Current consumtion:||Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter.|
|Colour:||Black, beige, brown or white|
|Weight:||7.5 g (0.26 oz) incl. Cable and MicroDot connector|
|Microphone diameter:||5.4 mm (0.21 in)|
|Microphone length:||12.7 mm (0.5 in)|
|Cable length:||1.8 m (5.9 ft)|
|Polarity:||Positively increasing sound pressure produces positive going voltage on MicroDot pin|
|Temperature range:||-40 °C to 45 °C (-40 °F to 113 °F)|
|Relative Humidity (RH):||Up t 90%|