Decimator Design MD-QUAD v3 3G/HD/SD-SDI Quad Split Multi-Viewer - DD-MD-QUAD
£1,429.80
£1,191.50
SKU
DD-MD-QUAD
1 to 4 Channel Multi-Viewer / Quad-Split with SDI and HDMI outputs for 3G/HD/SD and Custom Layouts
Decimator Design MD-QUAD v3 3G/HD/SD-SDI Quad Split Multi-Viewer, 3G/HD/SD-SDI + HDMI Outputs + TPG - DD-MD-QUAD
FEATURES
-
Support both 3G level A and B on the input and output. Allowing conversion between 3G level A and B.
-
Professional 3G/HD/SD Test Pattern Generator featuring:
-
26 Selectable Output Formats
-
54 Test Patterns including Luma and Chroma Zone-plates
-
Audio Tone Generator
-
Horizontal and/or Vertical image flipping per window
-
Low cost miniature (3G/HD/SD)-SDI 1 to 4 channel Multi-Viewer or 4 to 1 input multiplexer
-
Custom Layouts with various standard layouts
-
16 Character UMD overlay per window with individual enables, custom positioning and size
-
8 Channel Audio Metering overlay per window with individual enables, custom positioning and size
-
Tallies can be applied to either Tally Boxes (Default) or Border
-
Tally boxes allows for up to 4 Tallies per window (Green, Red, Blue and Yellow)
-
Load and restore Custom Layouts
-
Fast switching between inputs using Full-Screen scaling
-
Selectable output format in both Full-Screen and Multi-Viewer mode
-
Low latency buffering for each input allowing non-synchronous inputs
-
Linked (3G/HD/SD)-SDI and HDMI outputs
-
4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
-
Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
-
Variable aspect ratios per window
-
Pass-Through mode allowing any of the 4 inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs
-
An extensive selection of user controllable functions via a easy to use rotary encoder for menu selection. LEDs and a push button can then be used for status and control
-
USB port for control and updates
-
Locking DC Power Socket
-
5 GPI on standard RJ-45 connector connector for Tallies and Remote Switching
-
RS422/485 is also include on the same RJ-45 connector for Dynamic UMD and Tallies via TSL protocol
-
The following is included with the unit:
Power Supply, HDMI Cable, USB Cable and Mounting Bracket
SPECIFICATIONS
VIDEO FORMATS
3G:SMPTE 424M@2.97 and 2.967Gb/s 1080p@60/59.94/50Hz
HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s 1080i@60/59.94/50Hz
1080p/psf@30/29.97/25/24/23.98Hz
720p@60/59.94/50/30/29.97/25/24/23.98Hz
SD:SMPTE 259M@270Mb/s 625i50
525i59.94
MENU OPTIONS Input status for all 4 inputs
Output format
Output selection of Quad Split or input 1, 2, 3 or 4.
Output aspect and type of 16:9 or 4:3 at either 90 or 100% of screen size
Individual aspect format for each input of Same as output, Letter-box or Pillar-box
Border Enable
Quad split mode reference of either Free-run or input 1
INPUTS Input Equalization > 100M using Belden 1694A
USB for control and updates
GPI on RJ-45
OUTPUTS 1 x 10-bit (3G/HD/SD)-SDI Re-clocked
HDMI
LED STATUS Power
4 x Signal lock and rate
DIMENSIONS 90mm x 94mm x 23mm (3.5 x 3.7 x 0.9 inches)
POWER +5V to +24V DC, 6 Watts
Positive Centre Pin