Basket 0

Based at Pinewood Studios

Blackmagic Design ATEM Camera Control Panel - BMD-SWPANELCCU4

Zoom Out
Zoom In

Rollover image to zoom

BlackMagic Design
SKU: BMD-SWPANELCCU4

Blackmagic Design ATEM Camera Control Panel - BMD-SWPANELCCU4

£2,455.20 (inc VAT) £2,046.00 (exc VAT)

Free Delivery

In stock PRE-ORDER NOW

Seen it cheaper? more 

Blackmagic Design ATEM Camera Control Panel Due to Ship May / June 2018

Control up to 4 cameras at one time including iris, shutter speed, white balance, master gain, pedestal, RGB and more!

 

Independent control for up to 4 URSA Mini, URSA Broadcast, Blackmagic Studio and Micro Studio cameras from a single control panel

 

FEATURES

  • LCD Menu Displays
    4
  • Camera Number Display
    Green off air, orange preview, red on air.
  • Setup
    White and black balance setup.
  • 3 Axis Joystick
    4
  • Preview Button
    4
  • Iris Control
    Auto Iris On, Coarse control and Focus control.
  • Panel Active
    Protects settings.

 

WHAT'S IN THE BOX

  • ATEM Camera Control Panel

Live Production and Broadcast Update

Key Features

The ATEM Camera Control Panel is a compact remote camera control unit designed to control up to four different URSA Broadcast, URSA Mini, Blackmagic Studio or Blackmagic Micro Studio cameras. The control panel features traditional broadcast style controls and adjustments so a single person can monitor and adjust a wide range of technical parameters such as black levels, gain, color balance, shutter speed and more. This leaves your camera operators free to focus on the more creative aspects of live production such as framing and composition. Unlike traditional CCU controllers, which have to be installed into a desk, the ATEM Camera Control Panel has been designed to be portable so it can simply be placed on any desktop or bolted down so it can be mounted in a slide out rack shelf. The controls are arranged in a familiar and logical layout, making it perfect for both experienced and new operators. Plus, it works with all ATEM switcher models

Control Four Cameras

One person can control 4 cameras

When working on live multi camera programs, it’s important to make sure all of the cameras are properly balanced and set up correctly so that you get consistent video from every angle. The ATEM Camera Control Panel features 4 camera controllers in one panel. Each camera controller includes a large LCD screen with soft buttons and knobs at the top of the panel, and a full set of professional controls below, on the main body of the panel.

Scene and Camera Controls

The top section lets you save and recall scene presets so you can quickly adjust cameras based on changes in the scene such as lighting. This section also includes controls for adjusting master gain, white balancing the camera and changing the camera’s shutter speed.

  • White Balance
    Quickly set and adjust white balance

<brLoad Scenes
Save and recall scene presets

  • Master Gain
    Boost sensitivity of sensor in low light or when more depth of field is needed
  • Shutter Speed
    Set the shutter speed of the camera
  • Bars
    Select to output color bars for the selected camera

Gain and Pedestal Controls

The center section features independent RGB controls for gain and pedestal, or white and black. This allows you to adjust the individual red, green and blue levels in your blacks and whites to compensate for unwanted colour.

  • White
    Independent RGB control for gain/whites
  • Black
    Adjust the RGB values for pedestal/blacks

Lens and Iris Controls

The bottom section features an LED camera number that indicates preview and on air status, along with a high quality professional joystick that’s used to precisely adjust the iris and master black. It also features a call button for talkback with the operator, along with a panel lock button and indicators for the network, power and cable connection to the camera.

  • Iris Control
    Joystick for adjusting iris and master black. Adjust up and down for iris, rotate for master black and push to select camera to monitor
  • Coarse Control
    Sets the limit of the iris control on the joystick
  • Iris and Master Black
    Locks the iris and master black controls on the joystick to prevent accidental changes
  • Master Black
    Controls the degree or level of black/pedestal without affecting contrast
  • Panel Active
    Lock out the entire panel to prevent accidental changes
  • Status Lights
    Indicate network connectivity, alarms and cable integrity
  • Preview
    Used for sending the aux feed to the monitor so you don’t have to move the joystick
  • Camera Number
    LED dot display that indicates camera number and on air/preview status
  • Call Button
    Flashes tally light and sends tone to get operator’s attention

Live Production Workflow

Works seamlessly with ATEM switchers

The ATEM Camera Control Panel connects directly to your ATEM live production switcher or ATEM hardware control panel via Ethernet. In many setups, you may be using multiple ATEM products such as an ATEM 4 M/E Broadcast Studio 4K switcher with an ATEM 1 M/E Advanced Panel and the ATEM Camera Control Panel. Ethernet can simply be looped from one ATEM device to another.

Fast and Easy Control

With traditional CCU controls, you can work much faster

The ATEM Camera Control is incredibly fast to use as it features traditional broadcast CCU controls so you get the benefit of years of broadcast experience. You can use the knob on the LCD to set the camera number, which turns red when a camera is on the air. The main joystick control can be moved vertically to adjust the camera iris while the knob can then be rotated to change the master black level. Pressing down on the knob will let you monitor the camera you’re currently controlling via the aux output of the switcher. Simply push the knobs to rapidly switch between cameras to ensure all your cameras match color. The ATEM Camera Control Panel is fast to set up so you can instantly start controlling the cameras that are connected to your switcher.

 

SPECIFICATIONS

Connections

Ethernet

2 x 10/100/1000 BaseT with loop output for additional control panels or computers.

Software Updates

1 x USB-C for firmware updates.

ATEM Camera Control Panel

Product Specifics

LCD Menu Displays

4

Camera Number Display

Green off air, orange preview, red on air.

Setup

White and black balance setup.

3 Axis Joystick

4

Preview Button

4

Iris Control

Auto Iris On, Coarse control and Focus control.

Panel Active

Protects settings.

Software

Software Applications

ATEM Software Control Panel.

Operating Systems

Mac Icon

macOS 10.12 Sierra, 
macOS 10.13 High Sierra or later.

Windows Icon

Windows 8.1 or 
Windows 10.

Power Requirements

Input Voltage

1 x Internal 110 - 240V AC.

Redundant Power

Yes

Physical Specifications

ATEM Camera Control Panel

Environmental Specifications

Operating Temperature

0° to 40° C (32° to 104° F)

Storage Temperature

-20° to 60° C (-4° to 140° F)

Customers who viewed this also viewed