AJA IPR-10G2-HDMI Bridging HD SMPTE ST 2110 Video and Audio to HDMI - IPR-10G2-HDMI
Single Channel SMPTE ST 2110 Video and Audio IP Decoder to HDMI 1.4b (HD) with Hitless Switching
AJA IPR-10G2-HDMI Bridging HD SMPTE ST 2110 Video and Audio to HDMI - IPR-10G2-HDMI
The IPR-10G2-HDMI Mini-Converter is designed to bridge SMPTE ST 2110 networks to HDMI, with support up to UltraHD 50p or HD 60p.
IPR-10G2-HDMI receives SMPTE ST 2110 audio and video over 10 GigE, and then de-encapsulates the data to output baseband HDMI video. Associated audio from the SMPTE ST 2110 stream is likewise extracted, synchronized, and embedded into the HDMI output. Simultaneously, analog stereo audio is available via the dual RCA outputs.
2x 10 GigE SFP+ cages are provided, allowing “hitless switching”* redundancy protection (ST 2022-7) for critical distribution and monitoring applications.
The analog/tri-level reference input allows the baseband output of IPR-10G2-HDMI to be locked to the timing of the baseband environment at destination. IPR-10G2-HDMI includes a full-size HDMI 1.4b video output for seamless integration into existing baseband environments such as master control, trucks, edit suites, multi-viewer applications and HDMI displays.
*Hitless switching via ST 2022-7 is supported up to 1080p 60 (UltraHD is not supported)
Features
IPR-10G2-HDMI extracts a SMPTE ST 2110 essence from an incoming IP stream and presents it for monitoring on, or routing to, HDMI devices. Providing two SFP+ cages for redundancy protection via "hitless switching", IPR-10G2-HDMI is rugged, quiet and fanless. AJA Mini-Converter design is ideal for placement in a wide range of display and device scenarios, from studios to field.
Key features:
SMPTE 2110 audio, video receiver
Rugged, quiet, fanless design
2x 10 GigE SFP+ cages for media LAN (providing support for "hitless switching" up to 1080 60p) with status light
1x 1 GigE RJ-45 socket for control LAN with status light
Dedicated HDMI receiver with full size (standard type A) HDMI 1.4b (24/30-bits per pixel) output up to HD 60p, 4:2:2, 10-bit, YCbCr/RGB, or UltraHD 30p, 4:2:2, 8-bit, YCbCr, or UltraHD 50p, 4:2:0, 8-bit, YCbCr
Embedded HDMI audio output (up to eight channels)
2x RCA analog audio output (simultaneous with HDMI audio)
Reference In connector to enable locking sync of baseband output for local environment
System Modes to enable quick setup for lowest latency / highest protection, etc.
Web browser accessible setup and control interface, via built-in webserver
1x mini-USB port providing an alternate method of initial network configuration with AJA eMini-Setup software
NMOS and Ember+ support
USB keyboard control for quick and easy preset recalls
Customizable control with AJA REST API
Five year warranty
SPECIFICATIONS
Video Formats
(UltraHD) 3840x2160p 23.98, 24, 25, 29.97, 30, 50
(HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920x1080i 50, 59.94
(HD) 1280x720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94
Video Quality
Up to 1080 60p, 4:2:2, 10-bit, YCbCr/RGB uncompressed
Up to UltraHD 30p, 4:2:2, 8-bit, YCbCr uncompressed
Up to UltraHD 50p, 4:2:0, 8-bit, YCbCr uncompressed
Discovery, Registration and Control
NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
Ember+ control (no discovery, control only)
AJA REST API control (discovery via SSDP or MDNS)
LLDP (Link Layer Discovery Protocol)
Supported over dedicated management Ethernet port and in-band over media ports
Media Transport Interfaces
SMPTE ST 2110 (-10, -20, -21, -30)
2x SFP+ Cages - SFPs not included
Recommended 10 GigE SFP+ modules:
Arista Networks SFP-10G-SR Compatible 10GBASE-SR
Fiberstore SFP-10GSR-85 10G SFP+ 850nm
Finisar FTLX1471D3BCL (for single mode 1310nm)
Mellanox MFM1T02A-SR 850nm 10G
Note: Maximum supported SFP+ power is 500 mW per SFP+ cage
Video Input IP
SMPTE ST 2110
Single channel video input up to UltraHD
SMPTE ST 2022-7 dual stream input for hitless switching*
Rx support for Narrow/Wide, Gapped/Linear Modes
*Hitless switching via ST 2022-7 is supported up to 1080p 60 (UltraHD is not supported)
Audio Input IP
SMPTE ST 2110
Up to 16-channels* audio, 24-bit per channel, 48 kHz synchronous
1 ms or 125 µs packet interval
*Streams with up to 16-channels are received but only the first 8 are output
Video Output Digital
1x HDMI Standard Type A connector
HDMI v1.4b 24/30-bits per pixel
Frame syncing to facility clock*
Concealment of errors due to packet loss*
*Frame syncing and error concealment functionality supported up to 1080p 60 (UltraHD is not supported)
Audio Output Digital
Up to 8-channel, HDMI embedded audio, 24-bit per channel, 48 kHz synchronous
Audio Output Analog
2x RCA analog audio
Levels at -10 dBu (nominal)
Reference
1x BNC
Analog/tri-level reference input
Allows baseband output of IPR-10G2-HDMI to be locked to the facility baseband clock
*Reference functionality support is up to 1080p 60 (UltraHD is not supported)
IP Clock
PTP support compliant with PTP PTPv2, PTPv3 / IEEE 1588-2008
SMPTE ST 2059-1 compliant
User Interface
1x RJ-45 for 10/100/1000 Base-T Ethernet
Web and REST clients supported for remote network setup and configuration
1x USB 2.0 Mini-B connector
AJA eMini-Setup supported for network setup and configuration via local desktop computer
Web and REST configuration is also supported in-band over media ports
Size (w x d x h)
5.07" x 0.94" x 5.06" (128.8 x 23.9 x 128.4 mm)
Weight
0.6 lb (0.3 kg)
Power
5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)
Environment
Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)
Monitor ST 2110 Video and Audio from anywhere on the Network.
The IPR-10G2-HDMI is a SMPTE ST 2110 to HDMI Mini-Converter suited for point-of-use applications including source monitoring, multi-viewer applications or simply an HDMI feed to compatible devices.
The AJA IPR-10G2-HDMI receives SMPTE ST 2110 IP video and audio, then formats the data for output on a full size HDMI 1.4b interface.
With 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router or edit bay via IP and provide HDMI monitoring at the destination.
The audio associated with the video stream is extracted, synchronized, and then embedded into the HDMI interface as well as output on an analog RCA interface.
Workflow
IPR-10G2-HDMI provides HDMI output from SMPTE ST 2110 video and audio over IP streams. Combine your IPR-10G2-HDMI Receiver with other AJA IP Receivers and Transmitters, or even take it a step further with AJA KONA IP or Io IP to instantly create a real-world SMPTE ST 2110 workflow for video over IP production and monitoring.
User Control
IPR-10G2-HDMI provides two key methods for control. The Control LAN Ethernet port enables full setup and control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration, and firmware updates using AJA eMini Setup software.
1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
Browser and REST clients supported
1x USB 2.0 Mini-B (IEC 62680-1) connector
Browser-based or AJA eMini-Setup of network parameters
NMOS transmit (Discovery, Registration and Control)
According to standards IS-04 v1.3 & IS-05 v1.1
LLDP (Link Layer Discovery Protocol)
AJA REST API (Control Only)
Discovery is supported via SSDP, allowing AJA REST API to then be used for Control
Discovery is also supported via MDNS, allowing AJA REST API to then be used for Control
Ember+ (no Discovery, Control only) v1.6.2
Universal Power Supply
All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world.
Compact and Portable
AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack, or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.
AJA Mini-Matrix
Information on the complete line of AJA Mini-Converters is now available as a mobile app on iOS. The Mini-Converter product line is extensive and this app helps you find the right converter for any situation, wherever you are.
Individual products have links back to the main AJA website for more details and you can email product information directly from the app. The free AJA Mini-Matrix app for iPad® and iPhone® is available now in the Apple iTunes® Store.
Industry Leading Support
AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your Mini-Converter installation, configuration, operation or encounter any technical issue, AJA Support will work with you to get up and running.
Mini-Converter products are covered by a generous five year warranty. Please see the individual Product’s Manual for additional specifics around warranty conditions for the product itself.