AJA Corvid 44 12G BNC Compact 12G BNC Power - CRV44-12G-R0-21
AJA Corvid 44 12G BNC Compact 12G BNC Power - CRV44-12G-R0-21
Corvid 44 12G BNC boasts four bidirectional 12G-SDI spigots with a Reference Input. 8K Input or Output is possible using quad 12G-SDI cables and 4K/UltraHD I/O can be achieved with either a single 12G-SDI or 6G-SDI cable, or quad 3G-SDI cables. 2K/HD I/O can be achieved with a single SDI cable or dual link SDI, while allowing capture and monitoring via SDI to take place simultaneously.
Corvid 44 12G BNC is available with either active (fan) vs. passive cooling (no fan), with both versions supporting RS-422 and LTC Input via headers on the top edge of the card.
Other Corvid 44 12G models are available, including low profile versions with HD-BNC connections.
Features
8K/UltraHD2/4K/UltraHD/2K/HD/SD, including multi-channel 4K up to 50/60p
4x full-size bidirectional 12G-SDI connections with 16-channel embedded audio per connection for a total of 64-channel/32-channel support for 8K workflows
RGB 4:4:4 12-bit, YCbCr 4:2:2 10-bit and HFR workflows supported
Dynamic FPGA Firmware Reconfiguration
4K Closed Caption Support
VPID signaling for SDR/HDR Transfer Characteristics, Colorimetry and Luminance via SDI
PQ, HLG and Dolby Vision Support
HDR Metadata Capture and Auto Playback Detection
Ref/LTC input on internal header (Analog black burst or Tri-level)
RS-422 on internal header
Active or passive heatsink
Includes support for the new Apple M1 chip
SPECIFICATIONS
Video Formats
(8K) 8192 x 4320p 23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
(UltraHD2) 7680 x 4320p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
(UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 47.95, 48, 50, 59.94, 60
(2K) 2048 x 1080PsF 23.98, 24, 25
(HD) 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1080PsF 23.98, 24, 25, 29.97, 30
(HD) 1080i 50, 59.94, 60
(HD) 720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94
Note: High Frame Rate and 8K/UltraHD2 capabilities are dependent on host system attributes. Not all systems and configurations will support all frame rates and raster sizes.
Video Inputs Digital
12G-SDI, SMPTE-2082, 12-bit*, 10-bit
6G-SDI, SMPTE-2081, 10-bit
3G-SDI, SMPTE 425
RGB 4:4:4 12-bit*, YCbCr 4:2:2 10-bit
1.5G-SDI, SMPTE 292M
Single Link HD-SDI YCbCr 4:2:2 10-bit
Dual Link RGB 4:4:4 12-bit*, Dual Link YCbCr 4:2:2 10-bit
270 Mbps SDI, SMPTE 259M-C
YCbCr 4:2:2 10-bit, 8-bit
*Bit depth support is application dependent. Check with your software manufacturer for compatibility.
Note: Corvid 44 12G BNC SDI connectors are full-size BNC
Video Outputs Digital
12G-SDI*, SMPTE-2082, 12-bit*, 10-bit
6G-SDI*, SMPTE-2081, 10-bit
3G-SDI, SMPTE 425
RGB 4:4:4 12-bit*, YCbCr 4:2:2 10-bit
1.5G-SDI, SMPTE 292M
Single Link HD-SDI YCbCr 4:2:2 10-bit
Dual Link RGB 4:4:4 12-bit*, Dual Link YCbCr 4:2:2 10-bit
270 Mbps SDI, SMPTE 259M-C
YCbCr 4:2:2 10-bit, 8-bit
*Bit depth support is application dependent. Check with your software manufacturer for compatibility.
Note: Corvid 44 12G BNC SDI connectors are full-size BNC
HDR
SDI: VPID signaling for SDR/HDR Transfer Characteristics, Colorimetry and Luminance
SDI I/O
SDI connections are bidirectional
2K/HD, capture and monitoring is simultaneous
4K/UltraHD with 12G-SDI, capture and monitoring is simultaneous
4K/UltraHD with 3G-SDI, all four connections must be used for either Input or Output
8K/UltraHD2 with 12G-SDI, connections must be used for either Input or Output
Note: When connections are configured for 12G-SDI or 6G-SDI, only UltraHD/4K/UltraHD2/8K formats are supported.
Audio Inputs Digital
16-channel, 24 and 16-bit SDI embedded audio, 48 kHz sample rate, synchronous
Audio Outputs Digital
16-channel, 24-bit SDI embedded audio, 48 kHz sample rate, synchronous
Downstream Keyer
Supports graphics with alpha channel over video, matte or framebuffer, or framebuffer content over incoming video or matte up to UltraHD/4K
Reference
Analog Color Black (1V) or Composite Sync (2 or 4V) or HD Tri-Level Sync (1V) via 1x full-size BNC on PCIe bracket
Reference input is terminated into 75 ohms when Genlock is set to Ref In
Timecode
LTC timecode input via 2-pin header on PCIe card, or via full-size BNC Ref In connector (switchable) on PCIe bracket
Electrical Interface
8-lane PCIe 3.0
Machine Control
RS-422, Sony 9-pin protocol via header on PCIe card
9-pin D-connector pinout is as follows:
1
GND
2
RX-
3
TX+
4
GND
5
No Connection
6
GND
7
RX+
8
TX-
9
GND
Shell
GND
Size (w x d x h)
0.75" x 7.0" x 4.75" (19 x 178 x 121 mm)
Noise
<50dBA (A-weighted at 1m in free air) [models with active cooling (fan)]
Ultra quiet (virtually silent) [models with passive* cooling (no fan)]
Passive cooling requires in-host/chassis air-flow minimum of 150 LFM (linear feet per minute) at 30 C
Weight
PCIe Card: 0.6 lbs (0.3 kg)
Power
25W typical, 32W maximum
PC Internal ATX Power Connector (Molex p/n 45559-0002)
Note: Unlike other Corvid cards, Corvid 44 12G can use either PCIe power from a 6 pin ATX connector, or via the PCIe slot
Environment
Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)
Raster and Frame Rate Support
Corvid 44 12G BNC supports 8K (8192 x 4320) and UltraHD2 (7680 x 4320) High Frame Rate (HFR) workflows up to 50/60p for the most demanding applications. Film rates of 23.98, 24, 47.95 and 48p are also supported across 8K, 4K, and 2K.
High frame rates are also available on multiple I/O 4K, UltraHD, 1080p and 720p HD up to 50/60p, making Corvid 44 12G BNC extremely flexible for your current and future needs.
Hardware Keying
The built-in hardware downstream keyer allows graphics and images to be easily overlaid on the input video in real time up to 4K.
Reference and LTC Input
Corvid 44 12G BNC provides one external, switchable LTC/Reference Input connection on the back of the card.
RS-422
A built-in RS-422 connection is available as an "internal" connection via a header on Corvid 44 12G BNC. RS-422 allows control of external devices for frame accurate ingest and layoffs.
Industry Leading Support
AJA’s technical support is recognized as among the best in the industry and is available to all AJA customers. If you need assistance with any aspect of your Corvid installation, configuration, operation or encounter any technical issue, AJA Support will work with you to get up and running.
Corvid products are covered by a generous three year warranty, including advance replacement as standard.