RODE NTG2 Broadcast 48v Condenser Shotgun Microphone - NTG2

£291.34 £242.78
Call for Lead Time on this Product
SKU
NTG2

Short Shotgun Condenser Mic with super-cardioid polar response & HPF. 48V powered. Supplied with pouch, RM5 stand mount & WSVM windshield.

Rode NTG2 Broadcast 48v Condenser Shotgun Microphone - NTG2

 

FEATURES

  • Broadcast sound quality
  • Low noise circuitry
  • Condenser transducer
  • Rugged metal construction
  • Two-step High Pass Filter (Flat/80Hz)
  • P48 phantom power or AA battery option
  • Low handling noise
  • Low weight - 161g (5.17 oz.)
  • Includes mic clip, windshield and zip case
  • Ideal for professional applications within the film, video, television and production industries
  • 10 year extended warranty when you register online at www.rodemic.com/warranty

 

The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over the microphone while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response, a selectable high-pass filter at 80Hz is available, which will prevent low-end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry-leading 10-year warranty.

SPECIFICATIONS
 
Acoustic Principle Line Gradient
Active Electronics JFET impedance convertor with balanced transformer output
Capsule 0.50"
Polar Pattern Supercardioid
Address Type End
Frequency Range 20Hz - 20kHz
Output Impedance 250Ω
Maximum SPL 131dBSPL
Maximum Output Level 6.9mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 18dBA
Power Options AA Battery+48V phantom power
Weight 161.00g
Dimensions 280.00mmH x 22.00mmW x 22.00mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration 

Related products

Check items to add to the cart or