IDX EP-9/4Si 4 x ENDURA-HL9 Batteries 1 x VL-4Si Simultaneous Charger with Intelligent Display Kit
88Wh Li-ion V-Mount High Load Battery with PowerLink & Digi-View
Our exclusive PowerLink feature connects two E-HL9 batteries for a total power capacity of 176Wh. The 6-step 5 LED power status display gives an accurate reading of capacity in 20% increments plus the last 10%.. The E-HL9 supports Digi-View for reading battery levels in many of today’s camera viewfinders. Battery Management System (BMS) can be used for enhanced diagnostics and a comprehensive review of the battery’s history of use. E-HL9 Power Status is an accurate display of the E-HL9’s remaining power. Visually and instantly indentified at any time or shown in the camera viewfinder via Digi-View.
Typical camera run-time: 3 hours approximately (@30W)
Dimensions: 3.35(W)x5.51(H)x2.28(D) inches
Weight: 1.63 lbs approx With its high capacity and high load discharge of 10.0 Amps at 120W, the E-HL9 is an all-round top performer
4-Channel Fully Simultaneous Quick Charger with Intelligent Display
The VL-4Si is a fully simultaneous, high speed 4-channel charger. To monitor the charge status of each individual battery, an LCD display and control panel is located on the front of the unit. Together with IDX’s Battery Management System software, the VL-4Si – via PC interface – provides detailed battery data to help manage and extend the life of a customer’s battery inventory. This is ideal for network operations and rental facilities.
Quick charge current:
All ENDURA & NP-style Li-ion batteries - 3A (up to 3 CH charging)/ 2.3A (all 4 CH charging). All Ni-Cad batteries – 1.9A
Input Voltage: AC100-240V 50/60Hz
Dimensions: 6.14(W)x6.02(H)x11.34(D) inches
Weight: 7.05 lbs approx
Compatible batteries: All IDX ENDURA System Li-ion batteries and all IDX NP-style Li-ion batteries via A-E2NP charger adaptor.
IDX is happy to introduce the new, Windows 7 (32bit/64bit) compatible, BMS software “BMS-B7”. BMS-B7 is easy to install and features a simplified graphical user interface screen. Please read carefully:
• Database feature is not available on BMS-B7.
• Data from previous BMS software is not transferable.
• Software is available by download from webpage only.
• If an older BMS and BMS-B7 are installed on the same PC, BMS-B7 will be the default version and will open when you connect your IDX charger/BMS-VR.
Please download the BMS-B7 software and operation manual from the following URL