Arri SkyPanel S60-RP 3,200 K MAN blue/silver Schuko - L0.0007069
Arri SkyPanel S60-RP Tungsten LED Softlight - L0.0007069
S60-RP, 3200 K, Manual, Blue/Silver, 3m DC Cable, S60 PSU, PSU Rail Mount, Standard Diffusion Panel, Schuko powerCON
FEATURES
- Interchangeable Remote Phosphor Panels (2700, 3200, 4300, 5600, 6500, 10,000 K & Chroma Green)
- Ultra-High Color Rendering
- Low Power Consumption (420 W Nominal)
- Tremendous Output - Brighter than 2kW Tungsten Soft Light
- Fully Dimmable from 0 - 100%
- Lightweight and Compact
- Beautiful Soft Beam of Light
- Wide Range of Accessories Available
- Thin Profile
- On-Board Battery Connection (23 - 36V DC)
- Onboard Simple Control Panel
- Onboard DMX In and Out
- RDM Implementation
- USB-A Connection for Firmware Updates
- EtherCon port for network connectivity
- Available in Blue/Silver and Black
- Fan Mode Selection
- External Lightweight PSU
- powerCON TRUE1 Power Connector
SkyPanel is available in three sizes: the S120, S60 and S30. The S120 is twice as long as the S60 but weighs nearly the same. Its larger light aperture makes a great soft light even better. Retaining the same features and colour tuneability as its smaller counterparts, the S120 consumes less than 400 watts, yet it is slightly brighter than the S60-C and has an outstanding efficacy of 90 lumens per watt. The S60 is a mid-range model, featuring a light aperture of 645 x 300 mm and accommodating the vast majority of applications. The S30 is a smaller, more portable version; half the length of the S60, it is perfect for on-the-go mobile applications. The S60 and the S30 are available in fully colour tuneable and remote phosphor versions.
Unlike other tuneable fixtures, SkyPanel makes no sacrifice when it comes to light output. SkyPanel puts out a tremendous amount of light, in a soft and uniform beam field. Brighter than a 1 kW tungsten soft light or a 3 kW tungsten space light, the SkyPanel S30 has more than enough light for most applications. At the same time, the lamp head can perform beautifully at lower light levels. This range of illumination and colour gives users an unprecedented amount of control.
SPECIFICATIONS
Lamphead | S60-RP |
Optical System | Remote Phosphor Panel |
Light Aperture | 645 x 300 mm / (25.4 x 11.8 inches) |
Beam Angle | 115º (Half Peak Angle) |
Weight | Manual Version: 11.7 kg (25.8 lbs) |
Pole Op Version: 12.8 kg (28.1 lbs) | |
Handling | Steel Yoke, High Strength Tilt Lock |
Pole Operation Option (Pan & Tilt) | |
Mounting | 28 mm Spigot (Junior Pin) |
Tilt Angle | +/- 90º |
Lamphead Voltage Input | 48 V DC |
Power Consumption | 410 W Nominal, 420 W Maximum |
Lamphead Power Connection | Male 3-Pin XLR - 15 amp (Pin 1: Negative / Pin 2: Positive) |
Battery Connector | Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive) |
Battery DC Voltage Range | 23 - 36 V DC |
Battery Mode Light Output | 50% of Total Output |
White Light | Changeable Remote Phosphors Panels: 2700K, 3200K, 4300K, 5600K, 6500K, 10000K & Chroma Green |
Coloured Light | |
Colour Temperature Tolerance | 4 - 5 SDCM |
Colour Rendition | 2700K: CRI >98, TLCI >98 |
3200K: CRI >98, TLCI >98 | |
4300K: CRI >97, TLCI >96 | |
5600K: CRI >97, TLCI >96 | |
6500K: CRI >96, TLCI >94 | |
10000K: CRI >92, TLCI >88 | |
Green-Magenta Adjustment | |
Dimming | 0 - 100% Continuous |
Control | On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN Network Connectivity, USB-A |
Remote Device Management (RDM*) | DMX Setup, Hour Counter and Standard RDM Commands |
Software Interface | Ethernet: DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac USB-A: Software upgrade via flash drive |
Housing Colour | Blue/Silver, Black |
Ambient Temperature Operation | -20 - 45ºC (-4 - 113ºF) |
Protection Class | IP 20 |
Estimated LED Lifetime (L70) | 50,000 hours |
Estimated Colour Shift Over Liftetime | +/- 5% K |
Certifications | CE, CB, ENEC, cNRTLus, FCC, PSE |
Power Supply Unit | S60 PSU |
Power Supply Input Range | 110- 240 V AC, 50/60 Hz |
Power Supply Output Range | 48 V DC |
Power Input Connection | powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available) |
Power Output Connection | Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through) |
Weight | 3.5 kg (7.7 lbs.) |
Dimension | 383 x 192 x 90 mm (15 x 7.6 x 3.5 inch) |
Control | On-Board On/Off Switch |
Mounting | Super Clamp Attachment / SkyPanel PSU Rail Mount |
SkyPanel Features
The SkyPanel Family. Different sizes for different applications.
The new ARRI SkyPanel is an exceptionally versatile LED soft light – compact
WHAT'S IN THE BOX
- 1x S60-RP
- 1x 1m DC Cable
- 1x S60 PSU
- 1x PSU Rail Mount
- 1x Standard Diffusion Panel
ARRI SkyPanel Reveal film from ARRI on Vimeo.
ARRI SkyPanel Features from ARRI on Vimeo.